Vertical form fill and seal

Unable to find the machine you want? Go to my Wish list

Vertical form fill and seal machines Full bagging line

Technosys vertical form fill and seal machines are engineered to exacting standards and use only the highest quality components. They are hand-built by skilled, experienced packaging machine engineers. The result is an extremely reliable, efficient vertical form fill and seal machine. Maintenance and down-time are therefore kept to a minimum and this makes the machines cost-effective to own and operate.

The machines use a PLC and operator interface unit to store settings such as pack length, sealing temperatures, timings etc. The standard machine can store up to 10 programs, but this can be increased if required. The standard vertical form fill and seal machine finish is in durable powder coating, with all product contact parts in stainless steel. If preferred the machine can be manufactured entirely from stainless steel, or other food-grade/non-corrosive materials.

The vertical form fill and seal machines can be supplied to suit all types of packaging films, including laminates, co-ex, polypropylene, and with our special sealing system polythene and soluble film.

Complete packaging systems can be supplied including suitable feeding system, multihead weighers, bucket elevator, rotary packing tables etc.

The Cyclone 200 uses a combination of pneumatics and the sealing jaw mechanism to pull the film from the reel,

form the tube and pull the correct bag length. The bag length is easily adjustable throughout its range.

The type of bag that can be used on this machine is the standard pillow bag, as picture on the left.

Front view layout Plan view layout

Size Range

(Flat bag size)

Maximum Speed

Power Supply

Compressed air

Net. Weight

Width: 60 - 200mm

Length: 50 - 250mm

40 packs/min

Single phase 13 amp

0.6 m³/min @ 6 BAR

400kgs

The Cyclone 200B machine uses the belt draw-down system to pull the film from the reel. The operator can easily adjust

the bag length through the interface unit. Bag length can be determined by a photocell registration mark, or by using a

rotary encoder to measure the exact pack length.

As pictured on the left these are the type of bags available to use with this machine, they are: standard pillow bag, pillow

bag with gusset, block bottom, and the the block bottom quantum.

Front view layout Plan view layout

Size Range

(Flat bag size)

Maximum Speed

Power Supply

Compressed air

Net. Weight

Width: 60 - 200mm

Length: 50 - 280mm

100 packs/min

3 phase 0.375kw

0.6 m³/min @ 6 BAR

600kgs

The Cyclone 300 machine uses the belt draw-down system to pull the film from the reel. The operator can easily adjust the

bag length through the interface unit. Bag length can be determined by a photocell registration mark, or by using a rotary

encoder to measure the exact pack length.

As pictured on the left these are the type of bags available to use with this machine, they are: standard pillow bag, pillow

bag with gusset, block bottom, and the the block bottom quantum.

Front view layout Plan view layout

Size Range

(Flat bag size)

Maximum Speed

Power Supply

Compressed air

Net. Weight

Width: 100 - 300mm

Length: 100 - 400mm

50 packs/min

3 phase 0.55kw

0.6 m³/min @ 6 BAR

1000kgs

The Cyclone 400 machine uses the belt draw-down system to pull the film from the reel. The operator can easily adjust

the bag length through the interface unit. Bag length can be determined by a photocell registration mark, or by using a
rotary encoder to measure the exact pack length

As pictured on the left these are the type of bags available to use with this machine, they are: standard pillow bag, pillow

bag with gusset, block bottom, and the the block bottom quantum.

Front view layout Plan view layout

Size Range

(Flat bag size)

Maximum Speed

Power Supply

Compressed air

Net. Weight

Width: 100 - 400mm

Length: 100 - 500mm

Extended M/C: 600mm long

45 packs/min

3 phase 0.75kw

0.7 m³/min @ 6 BAR

1100kgs